* * * * * * *
* * * INGENIA Automated Engineering Services *
* * * * Case Studies
 * *
* * * * * * *
*
*
About INGENIA
*
Special Purpose Machines
*
Case Studies
*
- Bias Cutter
*
- Auto Welder
*
- Hose Slitter
*
- Cap Remover
*
- Burst Test Rig
*
- Medical Connector
*
Rexroth Bosch
*
Contact Us
*
*
*
*
*
*
* *
Burst Test Rig - Thermopol

+ View more [1] [2] [3]		 * Medical Connector *
*
A plastic moulding manufacturer commissioned INGENIA to design, manufacture and install a machine to assemble, weld and test the four sub components of a medical tubing connector. The machine had to produce the fittings at 1800 parts per hour and remain unattended except for regular filling of the bowl feeders and removing the full bags of product.

The sequence of operation is:
  1. Place an 'o' ring in the end to the top
  2. Insert the stem so that the end
    "seals" on the o ring
  3. Ultrasonically weld the sub assembly
  4. Assemble the arms in the correct orientation
  5. Carry out leak test at 250 mBar for 1 second – discard failures to a reject holding container


All the main features of this machine (other than the ultrasonic welder and bowl feeders) were designed and manufactured by INGENIA 		*
<< Back to Case Studies  
* *
* * * * * * *
* * * * * * *
* * * * About INGENIA | Special Purpose Machines | Case Studies | Rexroth Bosch | Contact Us | Top * *
*